The battery list hiding in NEM 1.0 and 2.0 permit records
How to find solar customers from 2012 to 2018 who never added storage, and how to start the conversation without a scare pitch.
6 min read · Checked
California has a large group of homeowners who bought solar between 2012 and 2018, sized it for a retail-rate export credit, and never added a battery. The rate rules changed. Their system did not. That gap is one of the most straightforward retrofit lists available in public data, provided you approach it with the right numbers.
What changed for these homeowners
Under the older net metering rules, a solar customer could export afternoon power and receive a credit close to the retail rate. The system was effectively using the grid as a battery. Under the current rules, exported power is compensated at a much lower avoided-cost rate, while power drawn in the evening is billed at full retail.
For a household that is home in the evening, that means the value of the same array drops unless the power is stored and used later. A battery is the obvious fix, and the array is already installed.
This is not an emergency and it is not a reason to tell a homeowner they were cheated. It is a rate change that affects how their system performs. Say that plainly and let them decide.
Building the list from permits
Start with solar photovoltaic permits issued between 2012 and 2018. Exclude any parcel with a battery or energy storage permit issued at any point. That is the base list.
Add what you know about the household from the record: roof age, panel amperage, property type, and whether the system was installed on a roof that is now more than 15 years old. A battery retrofit on a roof that needs replacement is a harder sale, and a good contractor will say so.
Sort by system size if the permit carries it, and by property type. Larger arrays on single-family homes with a 200-amp panel are the easiest conversation. Small arrays on older panels may need an electrical upgrade first, which changes the quote.
The conversation that works
Do not open with a rate table. Open with a question about how they use power. "Do you run the air conditioning in the evening?" "Do you lose power in the fall?" The answers tell you whether storage solves a real problem or is just a nice upgrade.
Then show the arithmetic for their situation, using their own usage if they will share it. A battery that shifts four kilowatt-hours a day from export to evening use is a different sale than a whole-home backup system. Both are legitimate. Only one matches the household.
If they mention a planned roof replacement, stop selling the battery and talk about sequencing. Putting a battery and new panels on a roof that is going to be torn off is a mistake, and saying so builds more trust than closing the sale.
Qualify before you drive
Not every NEM 1.0 or 2.0 customer is a battery lead. Check the panel, the roof, the lot, and whether the original array is still working. A 2012 system with a failed inverter needs service before it needs storage.
Also check for existing storage under a different permit description. Municipalities classify storage as battery, energy storage system, ESS, or occasionally as part of the solar permit itself. If the record is ambiguous, ask on the phone rather than assuming.
What to do with this
- Filter solar permits to 2012 through 2018 and exclude parcels with any storage permit.
- Use evening usage and backup as the reason, not penalty language.
- Check roof age and panel capacity before you quote a battery.
- Ask about storage classification when the permit record is ambiguous.